Instruction Manual - Contour Side Table

This package includes 18 screws, a left panel (A), a right panel (B), and three shelves. Please hand-tighten screws only and avoid using electric tools.

Step 1) Lay Panel (A) on a protective surface, such as a blanket or towel, to prevent scratching and keep it stable during assembly. Place one shelf at the top, making sure the rounded corners align with the rounded corner of the panel. Match the screw holes on the shelf with those on the panel, then hand-tighten the screws starting from the back and moving toward the front.

Step 2) Attach the second shelf using the same method, aligning the holes and hand-tightening the screws from the back toward the front.

Step 3) Attach the final shelf using the same method, hand-tightening the screws from the back toward the front.

Step 4) Lay Panel (B) on a protective surface, as before. Make sure the top and bottom are oriented correctly, then align the screw holes of the assembled shelves and Panel (A) with the holes on Panel (B).

Step 5) Secure all three shelves to Panel (B) using a total of 9 screws. Hand-tighten each screw.

Step 6) Carefully stand the assembled Contour Side Table upright. Assembly is now complete — enjoy your new side table!

Care and Maintenance:

Wipe off any dirt or moisture on the product with a dry cloth and allow it to dry thoroughly.
Do not use chemicals such as thinner, benzene, or alcohol.

Warning:

Do not stand on the product or push yourself up using it.
Avoid direct sunlight or high temperatures.
Do not place heated pots, kettles, or similar items directly on the surface.
As natural wood is used, variations in grain patterns, knots, and color tones may occur. Please understand that these are not defects.